Hot Split TRANSFER Standard Inks
Transfer Plastisol Inks
Semi-Opaque Hot-Split Transfer Inks formulated for white or light fabrics. This series ink offers improvements in print-ability and transfer latitude over conventional hot-split inks. Use for Hot-Split or Cold-Peel process. Inks are available in Standard, High Opaque & 4Color Process application.
Use Hot Split Transfer Additive to your Fluorescent, Metallic and Glitter plastisol inks. Additives and modifiers are available such as PUFF, Suede & Stretch additive. |
Transfer inks have a wide variety of applications such such as: T-Shirts, Caps, Bags & as Garment labels.
Transfer Standard AP Colors
Ready to print Transfer AP colors designed for transferring on to White and Light colored fabrics.
PRINTING PARAMETERS:
Substrates: Knitted fabrics, Cotton, Linens & Polyester blends. ** NOT RECOMMENDED for woven Nylon or Lycra.
Substrates: Knitted fabrics, Cotton, Linens & Polyester blends. ** NOT RECOMMENDED for woven Nylon or Lycra.
Recommended Mesh: 110-195 t/in (43-77 t/cm).
Gel Temp: 195-230°F (on the paper) |
Transfer Temp: 365-375°F (on T-Shirt)
Transfer Pressure: 40-45 PSI – Transfer Time: 5-7 seconds |
Transfer PolyFlex Colors LB/HO
Ready to print Transfer High Opaque Poly colors designed for transferring on to all Cotton and Polyester dark colored fabrics.
PRINTING PARAMETERS:
Substrates: Knitted fabrics, Cotton, Linens & Polyester blends. ** NOT RECOMMENDED for woven Nylon or Lycra.
Substrates: Knitted fabrics, Cotton, Linens & Polyester blends. ** NOT RECOMMENDED for woven Nylon or Lycra.
Recommended Mesh: 110-195 t/in (43-77 t/cm).
Gel Temp: 195-230°F (on the paper) |
Transfer Temp: 365-375°F (on T-Shirt)
Transfer Pressure: 40-45 PSI – Transfer Time: 5-7 seconds |
Transfer 4color Process Inks
Hot Split TRANSFER Whites
Additives & Bases for Hot Split TRANSFER Inks
3010FF Stretch Additive
Helps to avoid cracking or flaking Fabrics: Polyester Triblends Mix: 10-25% to you plastisol inks |
3075FF Transfer Powder Adhesive
Enhance adhesion of your transfers Application: sprinkle adhesive powder on the printed transfer.
|
3020FF Hot Split Additive
Convert your standard plastisol ink to make heat transfers that can hot peel. Mix: +10% to your plastisol inks |
3000FF Curable Reducer
Plastisol Reducer & Extender Mix: 5% to soften plastisol inks Mix: 25% for higher mesh counts |
3045FF Puff Base /Additive
Puffy 3D & Elevated Bubbled effect Mix: 10-25% to your plastisol inks Recommended Mesh: 86-110ct |
3035FF Suede Base/ Additive
Elevated Suede & a soft Matte finish Mix: 10-25% by weight. Recommended Mesh: 86-110ct |
Instructional Videos for Plastisol Transfers
|
|